Digi International Network Hardware TS 2/4 Manual de usuario descargar pdf (Pagina 90)

17-2 Terminal Server Configuration Without RealPort

Terminal Server Configuration Without RealPort

In this configuration, Digi One/PortServer TS 2/4 functions as a terminal server, providing Telnet

and Rlogin access to hosts. This configuration enables the following:

• Telnet or Rlogin access to the LAN-based hosts, both from locally-connected terminals and from

devices accessing the LAN from the telephone network.

• Access for the LAN-based hosts to Digi One/PortServer TS 2/4 ports (sometimes called reverse

Telnet)

Related Information

For more information on configuring

• The Ethernet interface, see "Configuring the IP Address" on page 2-1.

• Terminal connections, see "Configuring Ports for Terminals and Computers" on page 6-1.

• Modem connections, see "Configuring Ports for Modems" on page 5-1.

Illustration

Configuration

set config ip=192.250.150.10 submask=255.255.255.0 (1)

set ports range=1-2 dev=term

set line range=1-2 baud=9600

set flow range=1-2 ixon=on ixoff=on (2)

set ports range=3-4 dev=mio

set line range=3-4 baud=115200

set flow range=3-4 ixon=off ixoff=off rts=on cts=on (3)

set user name=user1 (4)

Configuration Notes

1. The set config command configures the IP address and mask for the Digi One/PortServer TS 2/4

Ethernet interface.

2. The first set ports, set line, and set flow commands configure ports 1 and 2 for terminal connec-

tions.

3. The next set ports, set line and set flow commands configure the ports for bidirectional modems.

Software flow control (the default) is explicitly shut off and hardware flow control turned on

using the set flow command.

4. The set user command defines a user, which assigns a user name for login purposes. All Digi

One/PortServer TS 2/4 users can login with this name.

Host

Terminals

192.250.150.10

192.250.150.9

Modems

Digi Device

Host

192.250.150.17

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 103 104

Sin comentarios

Digi International Network Hardware TS 2/4 Manual de usuario Pagina 90