Digi ConnectPort Network Device Guía de usuario descargar pdf (Pagina 93)

PPP configuration

PPP (Point-to-point Protocol) provides TCP/IP communication over a modem connected to a serial

port on your ConnectPort LTS server. PPP allows you to connect a device to a network using a

telephone line and that device has access to the resources of the network as if it were directly

connected to the network.

Basic PPP settings

Under Basic PPP settings, users can set the PPP (Point-to-Point Protocol) options to enable or

disable the dynamic IP address pool. The dynamic IP address pool is a set of reserved IP addresses

unique to the network that are assigned to the incoming connections. Users set the first IP address to

use and the number of sequential addresses (plus one) to be reserved for assignment

Incoming PPP Connection

Incoming PPP connections are connections where users dial-in to the ConnectPort LTS product.

Users will typically connect using a modem and dial the phone number of the modem connected to

the serial port. Examples of incoming PPP connections are allowing users with a modem to access

the network that the ConnectPort LTS product uses or to create a network bridge by connecting two

separate networks together using modems.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 148 149

Sin comentarios

Digi ConnectPort Network Device Guía de usuario Pagina 93