Digi Digi One EM Guía de instalación Pagina 121
- Pagina / 168
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
set snmp
Chapter 2 Command Descriptions 121
authfailtrap={on|off}
Enables or disables the sending of authentication failure traps.
on
Enables the sending of authentication failure traps.
off
Disables the sending of authentication failure traps.
The default is “off.”
coldstarttrap={on|off}
Enables or disables the sending of cold start traps.
on
Enables the sending of cold start traps.
off
Disables the sending of cold start traps.
The default is “off.”
linkuptrap={on|off}
Enables or disables the sending of link up traps.
on
Enables the sending of link up traps.
off
Disables the sending of link up traps.
The default is “off.”
logintrap={on|off}
Enables or disables the sending of login traps.
on
Enables the sending of login traps.
off
Disables the sending of login traps.
The default is “off.”
Examples Enable authentication failure traps
set snmp trapdestip=10.0.0.1 authfailtrap=on
Specify a new private community string
set snmp privatecommunity=”StLucia72!”
See also • "revert" on page 39.
• To disable and enable SNMP, use the “set service” command. See "set
service" on page 118.
• To disable and enable SNMP alarm traps, see "send" on page 43.
- Digi Connect 1
- Contents 3 3
- 4 Contents 4
- Introduction 5
- Feature/Task Commands 6
- Basic Command Information 9
- Access the Command Line 11
- Configure an IP Address 11
- Introduction 12
- Command Descriptions 13
- Reboot the device server 15
- Close the current session 17
- Close all active sessions 17
- Device statistics 26
- Statistic Description 27
- IP statistics 28
- Display ICMP statistics 32
- Change Telnet options 34
- Display Telnet options 34
- Turn on binary mode 34
- Add line feed characters 34
- Display operating options 34
- Specify a simple ping 36
- Reconnect to port 1 38
- Reconnect to session 1 38
- [ip_address] 42
- [subnmask[1-32]=mask] 44
- Set access control settings 45
- Set alarms in GPIO mode 46
- Set alarms in match mode 46
- Set an alarm to “on” state 50
- Set alarm mode to GPIO mode 50
- Configure autoconnect 51
- Display autoconnect settings 51
- Configure port buffering 55
- Configure buffers 56
- Set device security settings 59
- Set forwarding settings 62
- Display forwarding settings 62
- Enable IP forwarding 62
- Configure GPIO pins 63
- Add a group 65
- Remove a group 65
- Display the current host name 68
- Updating Global Settings 69
- Adding/Updating Custom Menus 69
- [lkaupdateenabled={on 74
- "revert" on page 39 76
- Set the device id 77
- Commands without permissions 86
- Syntax Set permissions 87
- Set group permissions 101
- Set user permissions 101
- Configure modem emulation 102
- Display PPP outbound settings 104
- Turn on off RCI serial mode 113
- Enable or disable RTS toggle 114
- Set SNMP settings 120
- Display current SNMP settings 120
- Configure terminal settings 126
- Configuring Wireless Settings 136
- Inner and outer protocols 138
- Configure wireless settings 139
- Display wireless settings 139
- #> set wlan wepmode=128bit 143
- Command Descriptions 146
- Modem Emulation Commands 151
- User Scenario - Diagram A 152
- User Scenario - Diagram B 153
- RING and the 154
- S-Register Definitions 159
- Modem Emulation Commands 160
- Result Codes 161
- 168 Index 168
- Xon/Xoff 117 168
Relacionado con productos y manuales para Redes Digi Digi One EM
Redes Digi XStream-PKG-R RS-485 Manual
(60 paginas)
(60 paginas)
Redes Digi XPress Manual de usuario
(18 paginas)
(18 paginas)
Redes Digi XPress Especificaciones
(143 paginas)
(143 paginas)
Redes Digi ConnectPort X4 Guía de usuario
(271 paginas)
(271 paginas)
Redes Digi XPress Manual de usuario
(2 paginas)
(2 paginas)
Redes Digi XPress Manual de usuario
(8 paginas)
(8 paginas)
Redes Digi 34 Manual de usuario
(13 paginas)
(13 paginas)
Redes Digi CM Guía de usuario
(202 paginas)
(202 paginas)
Redes Digi SYNC/570i Manual de usuario
(54 paginas)
(54 paginas)
Redes Digi 34 Especificaciones
(148 paginas)
(148 paginas)
Redes Digi M10 Especificaciones
(38 paginas)
(38 paginas)
Redes Digi Digi One EM Guía de usuario
(43 paginas)
(43 paginas)
Redes Digi 9P 9360/9750 Guía de usuario
(75 paginas)
(75 paginas)
Redes Digi CM Manual de usuario
(1 paginas)
(1 paginas)
Redes Digi Rabbit 5000 Manual de usuario
(119 paginas)
(119 paginas)
Redes Digi LTS 32 Guía de usuario
(150 paginas)
(150 paginas)
Redes Digi ConnectPort X4 Manual de usuario
(37 paginas)
(37 paginas)
Redes Digi 9XTend-PKG-R RS-485 Manual de usuario
(4 paginas)
(4 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.101 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales