Digi XBee Guía de usuario descargar pdf (Pagina 65)

Configure XBee radio settings

Basic radio settings control basic operation of the XBee Module in a

ZigBee network.

• PAN ID: Sets the PAN (Personal Area Network) ID, in hexadecimal.

This is the preferred PAN ID for the ZigBee network. All Digi Drop-in

Networking products have a default PAN ID of 0x234. A PAN ID of

FFFF causes the XBee Module to select a random PAN ID.

Otherwise, the specified ID will be used.

When a Router or End device searches for a Coordinator on the

ZigBee network, it joins to a parent that has a matching PAN ID. If

that device's configured ID setting is FFFF, the device will join a

parent operating on any PAN ID.

Note: Changing the PAN ID may make your XBee product

inaccessible.

• Node Identifier: A descriptive, user-friendly name for the device.

This identifier is returned as part of any Node Discover operations

done on the ZigBee network. Using Node Identifiers for Drop-in

Networking devices makes it possible to reference them by names

rather than their physical addresses. Enter a name of up to 20

characters.

• Discover Timeout: Sets the amount of time a node will spend

discovering other nodes when a Node Join or Node Discover is

issued.

• Scan Channels: A bit field list of the channels to scan. The Digi

device chooses of the channels when starting the network. In a

Router or End device, the bit field is a list of channels that will be

scanned to find a Coordinator/Router to join.

• Scan Duration: Sets the scan duration exponent of the Active and

Energy Scans (on each channel) that are used to determine an

acceptable channel and Pan ID for startup of the Coordinator.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Sin comentarios

Digi XBee Guía de usuario Pagina 65