Digi LTS 32 Guía de instalación descargar pdf (Pagina 113)

113

Options port=range

Used to specify the serial port. Optional on a single-port device.

state={on|off}

Used to enable or disable the RTS toggle feature.

Enables the RTS toggle feature.

off

Disables the RTS toggle feature.

The default is “off”.

predelay=delay

Specifies the time in milliseconds to wait after the RTS signal is turned on

before sending data. The range is 0 to 5000 milliseconds. The default is 0.

postdelay=delay

Specifies the time in milliseconds to wait after sending data before turning

off the RTS signal. The range is 0 to 5000 milliseconds. The default is 0.

Example #> set rtstoggle state=on predelay=10

Sin comentarios

Digi LTS 32 Guía de instalación Pagina 113