Digi ConnectPort X4 - 802.15.4 Guía de usuario Pagina 42

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 254
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 41
Hardware
42
Cable fittings
To route serial, Ethernet or sensor cables outside the enclosure, and maintain IP66 rating, the three
hole plugs can be replaced with cable glands, available in different diameters. These cable glands
can be purchased separately from Digi.
To wire sensors through cable glands:
1 Locate cord glands.
2 Wire sensor to the 14-pin connector plug using the pinout guide provided in the enclosure or
in the pinout section on page 39. Up to 4 sensors can be wired into the 14-pin connector.
Note
Make sure that all cable glands are tightened and all empty holes are plugged before
use to maintain environmental rating.
Vista de pagina 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 253 254

Comentarios a estos manuales

Sin comentarios