
XStream-PKG-R™ RS-232/485 RF Modem – Product Manual v5.x00
4.3. Command Reference Table
Table 4.1. XStream Commands (The RF Modem expects numerical values in hexadecimal. “d” denotes decimal equivalent.)
AT Command Name Range Command Category
0x02 – 0xFFFF (x 100 msec)
BD v4.2B* 0x15 (21d) Baud Rate
Standard baud rates: 0 – 6
(custom rates also supported)
Serial Interfacing 2
Connection Duration Timeout
0x01 – 0xFFFF (x 100 msec)
Command Sequence Character
Connection Inactivity Timeout
0x02 – 0xFFFF (x 100 msec)
Force Wake-up Initializer
Time before Wake-up Initializer
ID v4.2B* 0x27 (39d) Modem VID
User-settable: 0x10 - 0x7FFF
Read-only: 0x8000 – 0xFFFF
Networking and Security 2 -
Wake-up Initializer Timer
0x10 – 0xFFFF (x 100 msec)
Time before Initialization
0 – 0xFFFF (0 = disabled)
* Firmware version in which command and parameter options were first supported.
NOTE: AT Commands issued without a parameter value will return the currently stored parameter.
© 2014 Digi International Inc. 24
Comentarios a estos manuales