Digi CM Guía de usuario descargar pdf (Pagina 54)

Configuring SNMP

54 Chapter 5

Configuring SNMP

To configure the Digi CM for SNMP do the following:

1. Access the Digi CM web interface.

2. Under the Network heading, choose SNMP configuration.

3. Fill in information for the MIB-II system objects section and choose Yes

under EnableAuthenTrap. The fields are described in the following section:

sysContact - Identity of the contact person managing the MIB-II system.

sysName - The name identifying the system. By convention, this is the fully

qualified domain name of the Digi CM unit. An example is:

DigiCM@companyname.com.

sysLocation. - The physical location of the unit such as Room 264 or

Engineering Lab.

sysService (Read only). - A series of values, separated by commas,

indicating the set of services the system provides. By default the Digi CM

only supports Application (7) service level.

EnablePowerOnTrap. - Determines whether the SNMP agent generates a

trap each time the Digi CM is started.

EnableAuthenTrap. - Indicates whether the SNMP agent process is permitted

to generate authentication failure traps.

EnableLinkUpTrap. - Determines whether the SNMP agent generates a trap

each time the network connection comes up.

EnableLoginTrap - Determines whether the SNMP agent generates a trap for

each login.

Note: Trap values override all other configuration information, meaning all other

authentication failure traps can be disabled with this setting.

4. Enter Access control settings based on the following field descriptions:

IP Address - Defines what applications can access the Digi CM SNMP agent

to exchange information and control actions. If no IP addresses are listed,

any application can access the SNMP agent.

Community - The options are public or private.

Permissions - The options are Read only or Read/Write.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 157 158

Sin comentarios

Digi CM Guía de usuario Pagina 54