Digi PortServer TS 8 Guía de usuario descargar pdf (Pagina 86)

Terminal Server Configuration Using RealPort

Chapter 19 Configuration Examples 86

Terminal Server Configuration Using RealPort

In this example, the Digi One and PortServer TS 2/4 is simply providing ports for the LAN-based host using

RealPort. The configuration is exceedingly simple because port attributes are configured on the host itself.

Related Information

For more information on configuring:

• The Ethernet interface, see "Configuring the IP Address" on page 12

• RealPort, see "Configuring Ports for RealPort" on page 16

Illustration

Configuration

set config ip=192.250.150.11 submask=255.255.255.0 (1)

set ports range=2-4 dev=rp(2)

Configuration Notes

1. The set config command configures the internet address and mask for Digi One and PortServer TS 2/4 Ether-

net interface.

2. The set ports command configures ports 2, 3, and 4 for Realport. This command specifies dev=rp, which is an

appropriate device type for RealPort.

Printer

Terminal

Modem

192.250.150.11

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 99 100

Sin comentarios

Digi PortServer TS 8 Guía de usuario Pagina 86