Digi ConnectPort X4 Guía de usuario descargar pdf (Pagina 109)

Configuration through the web interface

109

Digi SureLink™ settings

The Mobile Connection Settings configure Digi SureLink™ settings for a Digi device. SureLink

ensures that a Digi device is in a state where it can connect to the mobile network, and they can be

used to monitor the integrity of the established mobile connection.

There are two groups of SureLink settings:

 Hardware Reset Thresholds: These settings can be configured to clear any error states

that were resident in the Digi device’s cellular module, so the device can once again

connect to the network, if the connection is lost. It does this by first resetting the cellular

module after a default or specified number of consecutive failed connection attempts,

and then resetting the Digi device after a default or specified number of failed

consecutive connection attempts. Each of these connection-failure settings can be

disabled as well.

 Link Integrity Monitoring settings: These settings can be configured to perform a

selected test to examine the functional integrity of the network connection, and take

action to recover the connection in the event that it is lost.

Hardware reset thresholds

 Hard reset the modem module after the following number of consecutive failed

connections: Enables or disables a hard reset of the cellular modem module after the

specified number of failed connection attempts.This value can be a number between 1

and 255. The default is 3.

 Power-cycle the device after the following number of consecutive failed

connections: Enables or disables a power-cycle of the Digi device after the specified

number of failed connection attempts. This value can be a number between 1 and 255.

The default is 0, or off.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 270 271

Sin comentarios

Digi ConnectPort X4 Guía de usuario Pagina 109