Digi ConnectPort X4 Guía de usuario descargar pdf (Pagina 144)

Configuration through the web interface

144

UDP Sockets profile

The UDP Sockets profile allows serial devices to communicate using UDP. The UDP Server

configuration allows the serial port to receive data from one or more systems or devices on the

network. The UDP Client configuration allows the automatic distribution of serial data from one

host to many devices at the same time using UDP sockets.

The port numbering conventions shown in the TCP Sockets Profile also apply to UDP sockets.

Serial Bridge profile

The Serial Bridge profile configures one side of a serial bridge. A serial bridge connects two serial

devices over the network, each of which uses a Digi device, as if they were connected with a serial

cable. The serial devices “think” they are communicating with each other across a serial cable

using serial communication techniques. There is no need to reconfigure the server or the serial

device. Neither is aware of the intervening network. Serial bridging is also known as

serial tunneling.

This profile configures each side of the bridge separately. Repeat the configuration for the second

Digi device of the bridge, specifying the IP address of the first Digi device.

Local Configuration profile

The Local Configuration profile allows for connecting standard terminals or terminal emulation

programs to the serial port in order to use the serial port as a console to access the command line

interface. Profile settings enable and disable access to the command line.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 270 271

Sin comentarios

Digi ConnectPort X4 Guía de usuario Pagina 144