Digi CM Guía de usuario descargar pdf (Pagina 150)

Resetting Factory Defaults

150 Chapter 16

Resetting Factory Defaults

There are two ways to reset the unit to the factory defaults. The quickest and

simplest method is to push and hold the hardware factory default reset button

until the Ready light on the front panel goes out. The reset button is located on

the back panel of the unit next to the Ethernet port. The arrow points to the

reset button’s location.

The alternative method to reset the unit is through the web interface. The web

interface provides the option of retaining the IP settings. To use the web

interface to reset the Digi CM unit, do the following:

1. Access the web interface.

2. System administration > Configuration management

3. Under Configuration import select Factory default.

4. Select the Configuration factory default options you want to restore from

the checklist.

5. Click Import. The Digi CM unit will automatically reboot.

The following are the default values when the Digi CM unit is reset to the

factory defaults.

• Static IP Address: 192.168.161.5

• Port Access Menu IP Address: 192.168.1.100

• Port Access Menu TCP Port Number: 7000

Factory reset button

Digi CM 32 shown

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 201 202

Sin comentarios

Digi CM Guía de usuario Pagina 150