Digi CM Guía de usuario descargar pdf (Pagina 63)

Alerts and Notifications

Chapter 6 63

Traps

There are additional traps that can be set at the port level. The following table

shows where the trap is under Serial port > Configuration on the web

interface, trap name, configure options, and the trap functions. The MIBs for

Configuring SNMP

To configure the Digi CM unit for SNMP do the following:

1. Access the Digi CM unit’s web interface.

2. Under the Network heading, choose SNMP configuration.

3. Fill in information for the MIB-II system objects section and choose Yes

under EnableAuthenTrap. The fields are described in the following section:

sysContact - Identity of the contact person managing the MIB-II system.

sysName - The name identifying the system. By convention, this is the fully

qualified domain name of the Digi CM unit. An example is:

[email protected].

sysLocation. - The physical location of the unit such as Room 264 or

Engineering Lab.

sysService (Read only). - A series of values, separated by commas,

indicating the set of services the system provides. By default, the Digi CM

unit only supports Application (7) service level.

EnablePowerOnTrap. - Determines whether the SNMP agent generates a

trap each time the Digi CM unit is started.

EnableAuthenTrap. - Indicates whether the SNMP agent process is permitted

to generate authentication failure traps.

TRAP Notifies a system administrator of a significant event

Protocol Function

Trap Location Trap Name Function

Port access menu Port login trap

Notify about any login action to the port access menu

(succeed and fail)

Alert configuration Port login trap

Notify about login to this specific port (succeed and fail)

(only available if host mode is set to "Console server")

Alert configuration Device connection trap

Notify about a change of the DTR signal line (only

available if host mode is set to "Console server")

Alert configuration Active detection trap

Notify about changes in the device's response to the

probe string (see also "Automatic Device Recognition" on

page 23, only available if host mode is set to "Console

server")

Alert configuration Dial-in modem test trap

Notify about modem test (succeed and fail) (only available

if host mode is set to "Dial-in modem")

Port event handling Keyword notification trap

Notify about the occurrence of a keyword in the port log

(only available if host mode is set to "Console server")

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 201 202

Comentarios a estos manuales

Sin comentarios

Digi CM Guía de usuario Pagina 63

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Digi CM