Digi AnywhereUSB Guía de usuario descargar pdf (Pagina 19)

AnywhereUSB Remote I/O Concentrator User Guide 19

Initial AnywhereUSB Configuration

This chapter explains how to configure the IP address of an AnywhereUSB unit.

All current (Second Generation) AnywhereUSB models are DHCP and Auto-IP enabled by default.

The AnywhereUSB/5 (First Generation) model supports DHCP and has a static IP

(192.168.254.222/ 255.255.0.0) by default. Follow the respective instructions below for IP

configuration methods of the different models.

Note: Although not required, it is strongly recommended to configure ALL model AnywhereUSBs

with static IP addresses, or DHCP reservations. This is because the host computer connects

exclusively based on the AnywhereUSB’s IP address. So, if the AnywhereUSB’s IP address were to

change, the connection would be lost. A static IP configuration of an AnywhereUSB helps ensure

that the host computer remains connected.

AnywhereUSB/5 (First Generation)

Select the AnywhereUSB/5 (First Generation) on the left-hand side of the AnywhereUSB

Configuration Utility, click the Configure button, input the IP settings, click the Update button.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 68 69

Sin comentarios

Digi AnywhereUSB Guía de usuario Pagina 19