Digi AnywhereUSB Guía de usuario descargar pdf (Pagina 50)

Management

AnywhereUSB Remote I/O Concentrator User Guide 50

Reboot the AnywhereUSB

Changes to some device settings require saving the changes and rebooting the AnywhereUSB.

To Reboot the Unit from the Web UI:

1. From the web interface menu, select Administration > Reboot.

2. On the Reboot page, click the Reboot button. Wait approximately 1 minute for the reboot to

complete.

To Reboot the Unit using the front panel reset button:

1. Hold down the front panel Reset button for about 2 seconds, until the front panel LEDs start

blinking an amber color.

2. Quickly release the Reset button then hold it down again.

3. Wait about 4 seconds, until the front panel LEDs flicker then turn off.

4. Release the Reset button.

Note: This reboot procedure is only applicable when the AnywhereUSB is in a normal operational

state, i.e. when the System Status LED is blinking green. If the System Status LED is blinking a

repeating Red code (instead of slow green), please contact Digi technical support.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 68 69

Sin comentarios

Digi AnywhereUSB Guía de usuario Pagina 50