Digi AnywhereUSB Guía de usuario descargar pdf (Pagina 31)

AnywhereUSB Remote I/O Concentrator User Guide 31

Discover AnywhereUSB Devices on

Other Subnets

This chapter explains how to enable the AnywhereUSB Configuration Utility to discover

AnywhereUSB units on additional IP subnets.

Adding IP Addresses to the Discovery List

By default, the AnywhereUSB Configuration Utility scans the local subnet for AnywhereUSBs. To

discover AnywhereUSB devices on other subnets, add their IP address or subnet to the Discovery

List in the Discovery List Manager Dialog box.

1. Select Discovery List from the Edit menu.

2. Add the Subnet address or the IP Address of the individual device to the Discovery List

Manager. For example, to add the Class C network 192.168.2.x, enter 192.168.2.255. For a

Class B network example of 145.75.x.x, enter 145.75.255.255 (the router must be configured

to forward subnet broadcasts).

3. Enter the desired IP address and click Add.

Note: If the AnywhereUSB’s IP address is known, adding only that to the Discovery List, without

also adding the subnet, should normally be sufficient. Refresh the AnywhereUSB Configuration

Utility after closing the Discovery List. If discovery fails, ensure that Windows firewall is off.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 68 69

Sin comentarios

Digi AnywhereUSB Guía de usuario Pagina 31