Digi AnywhereUSB Guía de usuario descargar pdf (Pagina 29)

Menu Options

AnywhereUSB Remote I/O Concentrator User Guide 29

AnywhereUSB/2 and AnywhereUSB/5 G2 and AnywhereUSB TS 44:

The Configure button is not applicable to these model AnywhereUSBs.

Refer to Chapter 4 for information on configuring AnywhereUSB IP settings.

Refer to Chapter 8: Configure Device Description Information, for information on configuring the

AnywhereUSB's “friendly name.”

AnywhereUSB/5 M and AnywhereUSB/14:

For the Multi-Host capable AnywhereUSB models, the Configure button is exclusively used to

configure the Group Number that the host PC should connect to. Refer to Chapter 9 for more

information about multi-host connections.

Refer to Chapter 4 for information on configuring AnywhereUSB IP settings.

Refer to Chapter 8: Configure Device Description Information for information on configuring the

AnywhereUSB's “friendly name.”

Command Menu: Connect

The Connect command allows the IP Address of the AnywhereUSB to be added to the connection

list once the AnywhereUSB is selected in the Main Window.

Command Menu: Reboot

The Reboot command causes the AnywhereUSB to reboot. A confirmation dialog is displayed:

Note: The Reboot button in the AnywhereUSB configuration utility is only applicable to the

AnywhereUSB/5 (First Generation). All other AnywhereUSB models can only be rebooted via the

Digi Device Discovery Utility (if the ADDP Service is enabled) or the Web UI (which can be

password protected).

Command Menu: Web UI

The Web UI command opens the Web page of the selected unit.

Note: The AnywhereUSB/5 (First Generation) does not have a Web UI.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 68 69

Sin comentarios

Digi AnywhereUSB Guía de usuario Pagina 29