Digi AnywhereUSB Guía de usuario descargar pdf (Pagina 47)

Management

AnywhereUSB Remote I/O Concentrator User Guide 47

Update Firmware from a File on a PC

1. From the main menu, click Administration > Update Firmware. The Update Firmware page is

displayed.

2. Enter the name of the firmware or POST file in the Select Firmware edit box, or click Browse to

locate and select the firmware or POST file.

3. Click Update.

Important: DO NOT close the browser until the update is complete and a reboot prompt has

been displayed.

Factory Default Settings / Restore AnywhereUSB to Factory Defaults

There are several ways to reset the device configuration of an AnywhereUSB device to the factory

default settings: from the web interface, using the boot command from the command line, and

using the Reset button on the front panel.

The reset from the web interface and boot command are soft resets, while the reset button/

signal method is a hard reset.

Restoring the AnywhereUSB to its factory default settings clears all current configuration settings.

In addition, any files loaded into the device through the File Management page are also removed.

If the Keep network settings checkbox is checked, the network settings will not be reset.

Using the restore operation from the web interface is the best way to reset the configuration.

Before performing the restore operation, the settings can be backed up using the Backup/Restore

operation, which provides a means for restoring it after the configuration issues have been

resolved.

Using the Web Interface

The Factory Default Settings operation from the web interface clears all current settings, resets

password for the administrative/root user, and restores the settings to the factory defaults. This

method is the best way to reset the configuration, because the settings can also be backed up

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 68 69

Sin comentarios

Digi AnywhereUSB Guía de usuario Pagina 47